Techno Crafts

Water Jet Cutting Machine

Water Jet Cutting Machine

Designed with perfection, our Water Jet Cutting Machine is reckoned for its strong built, high performance features and easy operatability. We are Maharashtra, India based Supplier and ensure that the finest lot of Machines reaches the buyers. For this, we check the product quality prior to procurement and final dispatch. Furthermore, we offer it at cost effective prices, for the ease of the buyers.

More about Water Jet Cutting Machine

  • The cutting table comprises a precision-built steel construction embodying linear direct-drive motors on each of the two main axes. To achieve the required precision, the bridge and self-propelled carriage plate are powered by two direct-drive linear motors on each side. This results in a speed range from 1 to 30.000 mm/min.
  • Use of these components and construction enables the installation to achieve positioning accuracy and repetition accuracy of ± 50µm (at 20oC) across the machine's full range. The guide ways and drives are suitably protected from water and abrasive through bellows and protective stainless steel plating.


Direct-drive linear motors guarantee :

  • Better cutting behavior and absolute repetition accuracy (without needing to back-up) of the cutting head compared to traditional mechanical transitions using spindle, pinion, rack and gears.
  • Low maintenance as a result of the non-contact principle, combined with greatly reduced wear parts consumption.
  • Wide range of cutting speed and jogging speed, adjustable from very low to very high.
  • Fast response enables cutting speed to be rapidly changed.


Unmanned Production
Due to automatic control of the PJ high pressure pump and the process parameters, permanent supervision during the cutting process is not required. Resato water jets are equipped with an automated stop function that trips once a cutting task is completed. This means that all units will be acting in standby mode or will shut down and almost no energy is required.

Yes! I am interested

ACM Table Range

Net Cutting Range Machine type
In 2D 1 Cutting Head 2 Cutting Heads
2020 x 1520 mm ACM 2015-1 ACM 2015-2
2020 x 4020 mm ACM 2040-1  ACM 2040-2
2020 x 6020 mm ACM 2060-1  ACM 2060-2
3020 x 1520 mm ACM 3015-1 ACM 3015-2
3020 x 3020 mm ACM 3030-1 ACM 3030-2


Net cutting Range Machine type
In 2D 1 Cutting Head 2 Cutting Heads
3020 x 4020 mm ACM 3040-1 ACM 3040-2
3020 x 6020 mm ACM 3060-1 ACM 3060-2


Note : Different machine types or more cutting heads than two can be provided on special request.

  • Explore More Products

Looking for "Water Jet Cutting Machine" ?